Welcome to Zoeller! Feel free to reach out with our new chat feature!

X

Shallow Well Jet Pump

Well Pumps // Jet Pumps

Shallow Well Jet Pump

3/4 HP cast iron jet pump for shallow wells

If you need to remove water from a well, stream or lake to use in your household, a shallow well jet pump is an ideal choice. At Zoeller at Home, we have a 3/4 cast iron shallow well pump that will supply your home with water quickly and efficiently. 

Features and Benefits

What Is a Shallow Well Jet Pump?

A shallow well jet pump is a pump that pulls water from sources that are closer to the ground's surface, with a typical depth range of 25 feet or less. The pump is installed above ground with its strainer device inserted into the well. It is mounted to a pressure tank, then a watertight seal is placed at the head of the well to prevent contamination from surface water. 

Our 3/4 hp shallow well jet pump provides a water flow of up to 15 gallons per minute. It is wired to run at 115 volts but can be easily converted to 230 volts. This shallow well jet pump comes with a built-in ejector. The pressure tank and check valve are sold separately. 

The Benefits of a Shallow Well Jet Pump

A shallow well jet pump is ideal for water sources that are close to the surface. Our cast iron shallow well jet pump offers many benefits, including:

  • Highly efficient: Quickly and efficiently pumps water at a rate of up to 15 gallons per minute.
  • American-proud: Made in the USA using a Majority of U.S. Content
  • Reliable: 100% factory-tested and designed for long-lasting, top performance.
  • Warranty: We offer a two-year limited warranty. 
  • Low maintenance: Includes simple instructions and a quick start guide for easy installation, operation and maintenance. 

Shallow Well Jet Pump Installation

Shallow well jet pump installation is fairly straightforward. To ensure your shallow well jet pump is properly installed, follow the specific instructions in your owner's manual. Use these steps as general guidelines to prepare for installation:

  1. Shut off the water. Shut off the power to the existing pump and drain all pressure.
  2. Drain liquids. Drain all the liquid from the system and secure the discharge line.
  3. Check for damage. Make sure the existing system does not have any damaged or worn areas and tighten the system.
  4. Cover the well. Before you begin installation, make sure the well is covered to prevent the water from becoming contaminated.

Once the cast iron shallow well pump has been installed, run it a few times before using the water. It's also a good idea to take test samples of the water to make sure it is clear of dirt and debris and is safe for household use. 

Contact Zoeller at Home Today

When it comes to your home water, Zoeller has the trusted solutions you need. As a family-owned and operated business and one of the oldest, independently owned pump manufacturers in the U.S., we take pride in providing our customers with the highest quality products and services. If you have any questions or would like more information about our pumps, contact us today

Product Specifications

Pull water from a well, lake, or stream for household use with this shallow well jet pump.

This pump is installed above ground and connects to a single pipe shallow well to lift water 0-25'.

This 3/4 HP pump can provide water flow at up to 15 gallons per minute.

This pump is factory-wired to run on 115 volts, but can easily be converted to 230 volts.

You will need to install a pressure tank and check valve (not included) in order for the system to operate properly.

The pump features a built-in ejector, and includes instructions and a convenient quick start guide for easy installation and operation.

100% Factory tested

2-year limited warranty

Made in the USA using a majority of U.S. components.

Overall Dimensions Carton: 19.5" x 10.6" x 11" (49.5 x 26.9 x 27.9 cm)
Standard Weight 42 lb (19 kg)
Motor 3/4 HP
Hertz 60 Hz
RPM 3450
Volts 115 or 230 V - Factory-wired for 115 V
TagAmp 13.0/6.5 A
Phase 1 Ph
Discharge Size 1"
Flow 15 GPM
Impeller Type Precision-balanced, molded thermoplastic
Inlet Size 1-1/4"
Thermally Protected Yes
  • 151237 63
  • Cert Sa